Bicycle Motor Works has launched the top tier in eBike Battery Power in their new Molicel P50B collection. With Molicel INR-21700-P50B sets a new standard with the ultimate power-to-energy ratio ever achieved in the 21700 configuration.
*** This article was sourced by Molicel, crediting Molicel as owner of the content (graphs, research, artwork, information). Bicycle Motor Work claims no ownership of the content shared within this article.
The Molicel P50B cell features 5.0Ah for 100W discharge and 5C fast charge power, delivering remarkable performance and a low impedance, further guaranteeing more efficient power output with minimal heat generation.
In comparison to the Molicel P45B, the P50B boasts a significan runtime, better retention, and a slower heating rate, resulting in a doubled life cycle. The cell's exceptional qualities become the most ideal candidate to run high-demand applications, where both power and endurance are a priority.
FEATURE 1
The Molicel P50B is engineered with a high-nickel layered oxide cathode, delivering an impressive energy density of 265 Wh/kg.
FEATURE 2
The P50B hosts a high-wettability polymer separator is engineered to support a remarkable discharge current of 60A.
FEATURE 3
This cell contains engineered graphite anode that is specifically designed to support a fast charge rate of 5C while ensuring high safety standards.
FEATURE 4
The Molicel P50B is composed with advanced silicon-carbon composite anode technology, offering a significant enhancement in battery longevity, that doubles the cycle life from 700 to 1,400 cycles under a 100W discharge condition.
*** This improvement is achieved under conditions of a +1C charge rate and a -100W discharge rate.
FEATURE 5
The cell consists a low-temperature electrolyte formulation that is optimized for precise temperature control, allowing the system to deliver peak power of 238W in -10°C.
*** This performance is based on a state of charge (SOC) of 100% within 10 seconds.
FEATURE 6
The INR-21700 P50B has been meticulously optimized with interface engineering, achieving ultra-low impedance, measuring at just 13.5mΩ. The SEI and CEI technology effectively enhances battery reliability and ensures low impedance characteristics that extends cycle life. The innovative interface technology is specifically designed to enable sustained high-power output, faster charge rates and higher power output without compromising battery life.
Learn more about the Molicel P50B cell. The following content has been shared from manufacturer's website, as they are the content owner.
Disclaimer: This article credits Molicel for all content above this sentence. To learn more about Molicel P50B, please visit their website: https://www.molicel.com/inr-21700-p50b/
NEW SERIES LAUNCHED
Exclusively designed by Bicycle Motor Works we introduce you to our newest line, the Molicel P50B eBike Battery Collection.
The Molicel P50B Collection offers a variety of models, designed to meet your preferred level of capacity, range and encasement.
Shop our Collection.
Contact us for immediate assistance:
P: 484-793-2541
Comments